20242025 Honda SCL500 Saddlebag Attachment OEM 08L70-MLP-AA1

Built just for the SCL500, this genuine Honda Saddlebag Attachment adds a model-specific stay and hardware so you can mount Hondas matching saddlebag with a clean, factory look. The kit tucks in close to the subframe, protects the side panel, and relocates the rear reflectors with dedicated left/right brackets for proper alignment.

• Model-specific fit: Left-side stay follows the SCL500 body lines and keeps the bag clear of the wheel and suspension.
• Factory integration: Includes reflector relocation brackets (L/R) to maintain OEM lighting compliance.
• Works with Honda Rear Carrier: Compatible when installed alongside Honda Rear Carrier 08L70-K3S-JA0 (see notes below).
• All hardware included: Collars, bolts/nuts, and a cargo-limit label for a complete, bolt-on setup.

Fitment

• Honda SCL500 (20242025)
• Attachment Kit PN: 08L70-MLP-AA1
• Companion Saddlebag (sold separately in some regions): 08L05-K87-A31 (Large); 08L02-K0Z-J01 (Small, region-dependent)
• Mounting side: Left

Installation Notes

• When used with the Honda Rear Carrier 08L70-K3S-JA0, follow both instruction sets during assembly.
• Adhesive label reaches full strength in ~72 hours; wait at least 24 hours before riding.
• Typical torque values: 6mm fasteners ~12Nm; 8mm socket bolts ~40Nm.
• Honda recommends dealer installation.

Whats Included

• Saddlebag stay (left)
• Rear reflector stay, left & right
• Collars (x2)
• 6mm flange bolts (x2) & 6mm flange nuts (x2)
• 8mm socket bolts (x2)
• Cargo-limit label

Good to Know

• Keep loads compact and secured; observe the cargo label on the stay.
• Refer to the Genuine Accessory Users Guide to attach the matching saddlebag after the stay is installed.

Tip: Reuse the OEM reflector hardware as shown in the instructions; the kits brackets reposition the reflectors neatly around the new stay.